Thermal Activation of CH4 and H2 as Mediated by the Ruthenium Oxide Cluster Ions [RuOx]+ (x=1–3): On the Influence of Oxidation States

Thermal gas-phase reactions of the ruthenium-oxide clusters [RuO_x]⁺ (x=1–3) with methane and dihydrogen have been explored by using FT-ICR mass spectrometry complemented by high-level quantum chemical calculations. For methane activation, as compared to the previously studied [RuO]⁺/CH₄ couple, the higher oxidized Ru systems give rise to completely different product distributions. [RuO₂]⁺ brings about the generations of [Ru,O,C,H₂]⁺/H₂O, [Ru,O,C]⁺/H₂/H₂O, and [Ru,O,H₂]⁺/CH₂O, whereas [RuO₃]⁺ exhibits a higher selectivity and efficiency in producing formaldehyde and syngas (CO+H₂). Regarding the reactions with H₂, as compared to CH₄, both [RuO]⁺ and [RuO₂]⁺ react similarly inefficiently with oxygen-atom transfer being the main reaction channel; in contrast, [RuO₃]⁺ is inert toward dihydrogen. Theoretical analysis reveals that the reduction of the metal center drives the overall oxidation of methane, whereas the back-bonding orbital interactions between the cluster ions and dihydrogen control the H−H bond activation. Furthermore, the reactivity patterns of [RuO_x]⁺ (x=1–3) with CH₄ and H₂ have been compared with the previously reported results of Group 8 analogues [OsO_x]⁺/CH₄/H₂ (x=1–3) and the [FeO]⁺/H₂ system. The electronic origins for their distinctly different reaction behaviors have been addressed.     

无人机视角下的林木爆燃火特性研究

森林火灾“爆燃”现象的特征是突然发生的高强度、高蔓延速度的燃烧。目前为止，关于“爆燃火”的原因还没有达成共识。以无人机视角下对林木爆燃火特性研究，以四川木里特大森林火灾为研究对象，通过分析凉山州某森林扑火部队3月31日木里森林火灾当天KWT（科卫泰）无人机航拍火场画面，结合无人机实时影像及实地调研数据，分析了峡谷地形林火蔓延时空特征，探讨了峡谷中风向风速变化时空分布规律，研究了地形变化条件下，不同海拔高度风速特征，建立了无人机倾角测量风速模型（其中为风速m·s-1，为无人机倾角°）。结果表明，高山峻岭特殊地形环境下每天4:00—12:00时间段为静风期，为峡谷林火扑救最佳时期；午后15:00—17:00和晚上20:00—22:00为山谷地形风速活跃期；仿真软件数据显示山顶、谷底与山腰不同海拔位置的风速风向不统一，谷底会产生乱流现象，且风速与海拔不存在正相关关系，小气候在复杂地形中占主导影响地位；在谷口至山谷深处的中间位置会出现气流速度的波峰状态，并易形成乱流，为爆燃火发生提供了客观必要条件。该研究可为复杂地形环境下，森林草原火灾扑救安全提供数据和技术支撑。     

单重工作休假M/M/c排队驱动的流体模型分析

该文在M/M/c排队驱动系统中加入工作休假策略,研究了单重工作休假多服务台排队驱动的流体模型.利用拟生灭过程和矩阵几何解法得到驱动系统稳态队长分布.构建净输入率结构,导出流体模型的稳态联合分布函数满足的的矩阵微分方程组,进而利用Laplace-Stieltjes变换(LST)方法得到稳态下缓冲器库存量的空库概率及均值表达式.最后,给出模型在多信道无线Mesh网下的应用,通过数值例子展示参数变化对系统性能指标的影响.     

Experimental Investigation of Gas Dynamic Effects Using Nanoporous Synthetic Materials as Tight Rock Analogues

Transport in Porous Media - To improve the understanding of gas transport processes in tight rocks (e.g., shales), systematic flow tests with different gases were conducted on artificial micro- to...     

Tuning Emission Wavelength of Polymorphous Crystal via Controllable Alkyl Chain Stacking and Its Vapor- and Thermo-Responsive Fluorescence

Tuning fluorescence colour of solid-state materials has become a topic of increasing interest for both fundamental mechanism study and practical applications such as sensors, optical recording and security printing. In this work, a fluorescent colour tuneable molecule BA-C16 is rationally designed and facilely synthesized by attaching flexible long alkyl chains to 2-hydroxybenzophenone azine ( BA ), which shows both aggregation-induced emission (AIE) and excited-state intramolecular proton transfer (ESIPT) characteristics. Compared to BA , the simple introduction of long alkyl chains in BA-C16 leads to an emission wavelength redshift from 542 to 558 nm. This strategy of extending emission wavelength is rarely reported, and is ascribed to the enlarged through-space π-conjugation between interplanar molecules in the aggregate of BA-C16 . Three crystals of BA-C16 are obtained with green, yellowish green and yellow emission. According to characterization by X-ray crystallography, X-ray powder diffraction and differential scanning calorimetry, alkyl chains play an important role in inducing different stacking modes of the three crystals, which further leads to polymorph-dependent fluorescence colour. BA-C16 exhibits tuneable solid-state fluorescence upon vapor fumigation, or annealing based on a transition between a “near-monomer” crystalline state and a “dimer” crystalline state. BA-C16 is further applied for rewritable fluorescence printing tuned by vapor- and thermal-treatment.     

纳米硅增强纳米纤维薄膜的制备与研究

利用纳米硅粉和聚乙烯吡咯烷酮(PVP)的乙醇混合溶液,通过静电纺丝和碳化制备了Si/C纳米纤维薄膜.通过XRD、SEM、XPS、拉伸测试和TG法对样品进行表征.结果表明,纤维直径、薄膜表面元素含量、碳化薄膜强度可以通过控制Si与PVP含量而调节;当Si与PVP的质量比为0.2时,碳化薄膜拉伸强度最高其值为(6.1±0.3)MPa,继续增加硅的含量其薄膜强度明显降低.     

Alcohol/water-soluble porphyrins as cathode interlayers in high-performance polymer solar cells

Three alcohol/water-soluble porphyrins,Zn-TPy PMe I:zinc(II)meso-tetra(N-methyl-4-pyridyl)porphyrin tetra-iodide,ZnTPy PAd Br:zinc(II)meso-tetra[1-(1-adamantylmethyl ketone)-4-pyridyl]porphyrin tetra-bromide and Mn Cl-TPy PAd Br:manganese(III)meso-tetra[1-(1-adamantylmethyl ketone)-4-pyridyl]porphyrin tetra-bromide were employed as cathode interlayers to fabricate polymer solar cells(PSCs).The PC71BM([6,6]-phenyl C71 butyric acid methyl ester)and PCDTBT(poly[N-9″-hepta-decanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)])-blend films were used as active layers in polymer solar cells(PSCs).The PSCs with alcohol/water-soluble porphyrins interlayer showed obviously higher power conversion efficiency(PCE)than those without interlayers.The highest PCE,6.86%,was achieved for the device with Mn ClTPy PAd Br as an interlayer.Ultraviolet photoemission spectroscopic(UPS),carrier mobility,atomic force microscopy(AFM)and contact angle( )characterizations demonstrated that the porphyrin molecules can result in the formation of interfacial dipole layer between active layer and cathode.The interfacial dipole layer can obviously improve the open-circuit voltage(Voc)and charge extraction,and sequentially lead to the increase of PCE.     

Cephalotanins A–D,Four Norditerpenoids Represent Three Highly Rigid Carbon Skeletons from Cephalotaxus sinensis

Four polycyclic norditerpenoids, cephalotanins A–D ( 1 – 4 ) representing three unprecedented carbon skeletons with highly rigid ring systems, were isolated from Cephalotaxus sinensis and structurally characterized by a combination of various methods. Compounds 1 and 2 are new skeletal norditerpenoid trilactones, while 3 and 4 are two norditerpenoids featuring different new carbon skeletons. Biosynthetic pathways for 1 – 4 were proposed by involving diverse and very fascinating chemical events with the coexisting cephalotane troponoids as the precursors. Compound 1 exhibited good NF‐κB inhibition with an IC₅₀ value of 4.12±0.61 μΜ.